Cedar Shake Siding Cost in 2020: Pros & Cons of Cedar Siding

0
2047
cedar shake siding

Cedar shakes and shingles cedar shake siding are literally two distinct styles, although they’re often mentioned as only one style. Both are shorter vertical boards that are installed in an overlapping manner.

Traditionally cedar shake siding shaking is cut with an axe, while shingles are sawn. In today’s world, it’s likely to be sawing and shaking, a bit like a broken axe on the surface. Historically, shaking heads have wider butt ends than shingles. Looking for cedar exterior siding, check Quality Cedar Products that’s exactly what you’ll find – and at prices that fit your budget.

Wooden siding is not any longer as popular as before, but cedarwood and shingles show the sweetness of wood during a prominent way. thanks to labor, it tends to be costlier than other wooden siding options and has some advantages over other wooden siding options.

Product Information

The installation method for cedar shingles is that the same. the value is virtually an equivalent , differing only in wood quality and other building materials.

People with woodworking skills can do the work, although professional installers can handle all aspects of the project more efficiently, while also being equipped with the proper equipment and getting insurance. Product and repair cedar shake siding considerations also apply to warranty.

The average installation cost for cedar wood roof panels and wobble siding is $ 6.50 to $ 13.00 per sq ft . the standard of the wood, the dimensions of the board, the selection of favor and regional factors all influence the rationale for this range.

We’ll take a better check out the factors which will affect costs, but you’ll expect to pay a complete of $ 15,000 to $ 28,000 for a typical two-bedroom home.

Factors Affecting Total Cost

For almost all siding work, the main consideration is the removal and disposal of the previous siding.

Experienced staff can clean it up every day and can rent huge dustbins to handle materials. It is conceivable that this may result in necessary repairs to the exterior walls of the house, which may also result in additional costs, but this is the easiest time to deal with such resistance.

Shaking and banding style options are the main cedar shake siding  factors affecting value. You will choose between white and red cedar.

Red cedar is considered a higher material choice for a variety of reasons, although many of them are subjective. Red cedar is never painted, while white cedar is usually stained and sometimes painted, so more ongoing maintenance is required.

In addition, red cedar is also considered to be more durable or able to withstand years of weathering. To sum up, red cedar is more expensive than white cedar.

After choosing the type of cedar wood, you may be most worried about the grade of the fabric. It ranges from clear to knotted, or from advanced to flawed. But, like most things about style, this is usually a touch subjective.

Some people think that natural imperfections in wood (such as knotting) are part of the appeal, and if you want to save a lot of money, this is usually a factor you need to consider.

The next consideration is the thickness of the board. Similarly, shaking is often thicker than shingles. Higher density usually means more money.

Another option is the shape of the bottom edge of the rock, which includes straight edges, staggered edges or fragments of different lengths, and finally round or wavy edges. The last one is often more expensive. Straight edge pieces tend to be uniform in shape and size, so they are the cheapest option.

The additional building materials are items that will be included in the cost of the house, not separate line items.

Obviously, you need to nail the fabric to the wall, and flashing or curved stripes along the edges are part of what makes the job happen. All of these are usually possible, but $ 1.00 per square foot.

Not mentioned in our example project are stains on wood. This is an optional item, but it can greatly increase the price.

Generally, the price of dyeing or painting wooden floors cedar shake siding is about $ 2.00 per square foot, but this depends on the layout of the house.

There are many options for wooden siding. In this guide, we will specialize in styles such as “Bevel”, “Slab and Die” and “Split Log”. There is also a more traditional cedar shingle and milkshake siding option described in the following article.

Through solid wood flooring

The many styles and options of wooden siding are other competing materials, such as vinyl, fiber cement, engineered wood, and other synthetic materials that are often imitated. Although wood has an incomparable natural beauty, it is followed by the need for continuous maintenance.

Twenty years ago, wooden siding would not be the first choice for American residential siding, and historically it has ruled everything else. But now no longer.

According to the 2015 U.S. Census data, stucco and vinyl content is highest, while wood has fallen to only 3% of all new single-family homes with this coating.

As you can see, we have also added some other items which will increase the price. In our next section, we will outline various factors that may use wood siding options.

Factors Affecting Total Cost

Usually the first consideration is to remove the old siding. Then, once deleted, it must obviously be discarded. Although this adds up to thousands of dollars in total costs, a knowledgeable contractor can usually monitor this throughout the day and then pack your yard and save on fabric.

The style of the wood is the next factor to consider. This incidental wood and quality are factors that affect cost. Pine, oak, cedar and rosewood are common wood grains used in residential siding.

The contractor may advise on the type of wood based cedar shake siding on the design, and is also prepared to choose the grain and quality that they are willing to buy. Wood quality treatment surface for flaws or knots. Transparency grades are considered premium products, while some prefer knotted wood to look more authentic.

Knowledgeable contractor. This is for all 3 materials, which is why the range is so large. If we break down costs by type, it helps to understand project costs more sharply.

Cost Information-Part 2

Our guide is designed to help you understand the information a contractor may encounter when estimating a wood siding project. We divided it into three imaginary projects supporting the first style, and other considerations sometimes related to residential siding projects. Please note: These are estimated national averages.

Wood Cedar Beveled Siding: 2,000 square feet x $ 10.50 = $ 21,000 (including labor)
Plastic wrap: $ 250
Additional building materials: (i.e. corner panels, siding nails, decorative panels) = $ 600

Another aspect of increased costs is waste, which is more likely to occur on smaller boards.

However, experienced installers can support their experience if they are more likely to have less waste and can calculate this prepayment.

An inexperienced installer may not purchase wasted materials, so you may buy more materials.

Good, bad, so beautiful
Here we list why you should consider the advantages, disadvantages and main reasons of cedar and strip siding.

Pros: The sweetness of wood may be an important reason for anyone to choose it as a siding material.

With multiple options, including shaking and shingles, this is a truly unique look that is prone to aging, especially if properly maintained. Although relatively expensive compared to other wooden siding, it is still less than fiber cement or stone siding, comparable to high-grade vinyl siding.

Another benefit is the return on investment cedar shake siding for cedar and shingles. In general, the average return on investment for wood siding is about 77%, while cedar and shingles exceed 80%.

The sub-options in the style appear in beveled and chopped logs, where you can choose from a variety of options for how to cut boards or logs. Separate logs can also be used.

In contemporary siding work, this is usually purely style, but mimics how to build a cottage where the mortar is visible between each log. Acrylic compounds are usually used. This adds a little water and wind protection, but it does increase costs during installation and subsequent maintenance.

Wood still offers versatility, good thermal insulation and installability, and does not necessarily require maximum expertise as another siding option.

cost

The labor cost of installing wooden siding, especially beveled and wooden slats, is relatively low (compared to fiber cement siding). The handyman can do it himself or do it himself. Like all home improvement projects, experienced cedar shake siding contractors will handle installations more efficiently and provide service guarantees.

The average price of wooden siding is $ 6.50 to $ 14.00 per square foot installed. The split log will be located at the upper part of the range, with wooden boards and slats at the lower end and a bevel in the middle. Many factors influence the price of siding, which we will introduce below.

A typical two-bedroom house with wood and slatted wood siding usually costs between $ 18,000 and $ 30,000, which is very simple, but this is usually an honest thing. This style has artisan charm and may look great on a standing seam roof.

Building materials and builder licenses are not required and must be considered as part of the total cost of completing the work. Sometimes, contractors include these numbers in “house cost” rather than separating them as unique line items.

If staining or paint coating is needed, the contractor can do the siding work or be willing to try it, just like splitting wood. This will be quite expensive, but will definitely provide a layer of protection for the wood and help to maintain the wood in the future.

Initially, coatings can be used for 15 years or more. Then, repainting every 7 to 12 years will help to make your wooden wall last up to 50 years.

Labor costs are the last important factor. For wood siding, the price is usually lower and competitive because it is well known that wood siding is a job that you can simply accompany DIY or hire an uncertified worker to try.

Disadvantage:

A well-known disadvantage of all wooden siding is that it requires continuous maintenance. Red cedar is less, but after 30 years, it will show its age.

Over time, animals can infect wood, and cedar shake siding mildew can be a harmful factor. Coupled with wood without flame retardant treatment, it is undoubtedly flammable.

Color and care

The warning of wooden siding is that it requires routine and ongoing maintenance. After the primer is applied, the wood usually turns into all possible colors, so the sub-options are very rich.

Painted surfaces protect the wood from weathering, fungi and insects. However, they wear quickly, and once worn, this natural product attracts animals that feed on it or go home. Therefore, it is not necessary to apply it every 3 years instead of every 10 years.